Notices
 

Thread: Teak swim platform refurb?

Results 1 to 8 of 8
  1. Teak swim platform refurb? 
    #1
    Face Planting Noob
    Join Date
    Jul 2018
    Location
    Burleson, Tx
    Posts
    12
    IP
    Anyone on here ever refinished a teak swim platform? Mine is still in pretty damn good shape its just very faded and almost gray in color. Was wondering if I could get away with sanding it down a bit, restaining, and maybe a coat of epoxy or something for durability. Any advice would be great! Thanks
     
     

  2. #2
    Reverse Scorpion Professional
    Join Date
    Sep 2015
    Location
    Fairfield, CA
    Posts
    99
    IP
    Careful not to seal it because the teak wood will not be able to breathe. If you seal it up it can rot from inside, since water will still get in. You can lightly sand it if it has gotten too rough but just make sure to clean it good before re-oiling. Regular Teak oil treatment and it will last fine. At Correct Craft they used to soak them in linseed oil. That works well and is waaaaay cheaper than teak oil. Leaves the finish a tad lighter than teak oil though. Mine is 16 years old now and I treat it two or three times a year and it still looks great. Have used both teak oil and linseed oil over the years. When it starts to dry out some just re-oil it. At least that is my experience.
    Last edited by Samcaddle@yahoo.com; 07-13-2018 at 09:52 AM.
    Sam Caddle
    Lake Oroville, CA
     
     

  3. #3
    Face Planting Noob
    Join Date
    Jul 2018
    Location
    Burleson, Tx
    Posts
    12
    IP
    Quote Originally Posted by Samcaddle@yahoo.com View Post
    Careful not to seal it because the teak wood will not be able to breathe. If you seal it up it can rot from inside, since water will still get in. You can lightly sand it if it has gotten too rough but just make sure to clean it good before re-oiling. Regular Teak oil treatment and it will last fine. At Correct Craft they used to soak them in linseed oil. That works well and is waaaaay cheaper than teal oil. Leaves the finish a tad lighter than teak oil though. Mine is 16 years old now and I treat it two or three times a year and it still looks great. Have used both teak oil and linseed oil over the years. When it starts to dry out some just re-oil it. At least that is my experience.

    Awesome! Thanks I had no clue it just needed to be oiled lol. I will probably lightly sand it as well due to it being just a little rough to the touch. I appreciate it!
     
     

  4. #4
    Face Planting Noob
    Join Date
    Oct 2017
    Location
    San Diego, CA.
    Posts
    11
    IP
    Hi, After you lightly sand it use a good Teak Cleaner with an A & B solution. That gray oxidation will just wash away. It’s amazing how it bleaches out the wood. After it is clean and dry then oil it. My ’89 Barefoot Sanger has all the original Teak and it looks as good a new. I clean it once a year or so and oil it as needed.
     
     

  5. #5
    Reverse Scorpion Professional
    Join Date
    Sep 2015
    Location
    Fairfield, CA
    Posts
    99
    IP
    Good suggestion. I have had teak platforms for a bazillion years and never actually used a "teak" cleaner, just wash and re-oil. I will try that this off season. Thanks
    Sam Caddle
    Lake Oroville, CA
     
     

  6. #6
    Face Planting Noob
    Join Date
    Jul 2018
    Location
    Burleson, Tx
    Posts
    12
    IP
    Got it all done a couple days ago and damn what wa difference! Bought the Starbright 3 step kit. Cleaner,brightener, and Teak oil. Turned out even better than I thought!!

    Click image for larger version. 

Name:	Photo Editor-20180720_095013.jpg 
Views:	43 
Size:	1.65 MB 
ID:	12759
    Click image for larger version. 

Name:	Photo Editor-20180720_095105.jpg 
Views:	37 
Size:	1.83 MB 
ID:	12760
     
     

  7. #7
    Foilforum Addict Tallredrider's Avatar
    Join Date
    Dec 2010
    Location
    St. George, Utah
    Posts
    745
    IP
    I would still use some more oil than that and it will color up even better. Then dump some oil on it about every 3 rides or so and she will stay looking great. The oil will continue to seep into the wood over time. Nothing better looking than a nicely cared for teak swimstep!
     
     

  8. #8
    IP
    I got tired of sanding & re-oiling mine a couple times of year to keep it from turning grey again. So I sanded it one last time & had it sprayed with Linex truck bed liner with no grit (turns out like orange peeled paint). Then put a deck pad on top that I made out of Gator Grip. That was like 8 yrs ago. It still looks pretty much like this & has had absolutely no maintenance since.

    Click image for larger version. 

Name:	37327772755_4a61a02bef.jpg 
Views:	36 
Size:	65.2 KB 
ID:	12770
     
     

Similar Threads

  1. Swim platform protection
    By djkslc in forum General Discussion
    Replies: 4
    Last Post: 1 Week Ago, 03:38 PM
  2. swim platform
    By ord27 in forum Boat Discussion
    Replies: 14
    Last Post: 08-03-2015, 05:42 PM
  3. Teak ski platform
    By wakenup in forum Boat Discussion
    Replies: 0
    Last Post: 06-30-2012, 06:26 PM
  4. Cushy non-slip swim platform mat
    By Hydrosports in forum Mods / DIY
    Replies: 16
    Last Post: 12-26-2009, 12:58 PM
  5. Non-slip mat for the Platform
    By Hydrosports in forum Boat Discussion
    Replies: 0
    Last Post: 12-15-2009, 08:07 PM
Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •